The anti-glare board impact test device meets the requirements of the national standard GB/T 24718-2009 "Anti-glare board". The anti-glare board anti-impact test device is specially designed and produced for the production, quality supervision, engineering construction and supervision units to measure the anti-glare board impact resistance. The test method of this machine is to adjust the steel ball of the specified weight at a certain height, make it fall freely and hit the sample, and judge the quality according to the degree of damage. It is suitable for the fastness of plastics, plastic products, ceramics, glass fiber, tempered glass and other materials and test coatings.

GB/T 24718- 5.5.3.3 Impact resistance test part

Place the sample on the sample holder, and use a steel ball with a weight of 1Kg to freely fall from a distance of 1m from the sample to impact the sample. After the sample is impacted, the sensor detects the position of the steel ball, and the electromagnetic automatically captures it to prevent the steel ball from continuing. Raising and falling back to the specimen results in secondary contact with the specimen.

The sensor automatically detects the position of the steel ball, and the electromagnetic automatically captures it.

This machine has the functions of electromagnetic hammer grasping and anti-secondary impact. It is safe and reliable in operation. The height of the whole machine is small, which is easy to install and easy to operate.