[Scope of Application]
The electronic pore size tester, also known as the filter paper pore size tester and bubble test bench, is used to test the maximum and average pore sizes of filter materials such as filter paper and filter materials.
[Compliant with standards]
ISO 2942-2004 Hydraulic fluid power - Filter cartridges - Verification of structural integrity and determination of initial bubble point
GB/T 14041.1-2007 Hydraulic Filter Elements Part 1: Structural Integrity Verification and Determination of Initial Bubble Point
ISO 4003-1990 Permeable sintered metal materials - Determination of void size during bubble testing
GB/T 5249-2013 Permeable sintered metal materials - Determination of bubble test aperture
JB/T 5089.3 Paper filter cartridges for internal combustion engines - Part 3: Test methods for oil filters
Performance characteristics
Designed and manufactured according to the testing principles established in QC/T794-2007 standards. The principle is based on the principle of capillary action. As long as air is measured to forcefully pass through the pores of the material being tested that have been wetted by a liquid, the liquid in the largest pore tube of the test piece is expelled by air. The pressure required for the first bubble to emerge from the pores is determined. Using the known surface tension of the liquid at the measured temperature, the maximum and average pore sizes of the test piece can be calculated using the capillary equation. Adopting advanced electronic technology, the parameters can be pre-set, and the large LCD screen displays the pressure value and automatically calculates the display aperture value. Each step of the operation interface has text prompts, making the operation simple. Print the aperture value of each test piece and the average value of a set of test pieces through a printer.
[Technical parameters]
1. Air pressure 0-20kpa
2. Pressure rate 2-2.5kpa/min
3. LCD screen display 240128 dot matrix
4. Pressure value accuracy ± 1%
5. Pressure resolution 1Pa
6. Aperture resolution 1 μ M
7. Test piece thickness 0.10-3.5mm
8. Test effective area 10 ± 0.2cm 2
9. Inner diameter of clamping ring φ 72 ± 0.5mm
10. Gas cylinder volume 2.5L
11. Power supply 220V AC
12. External dimensions: 450 * 500 * 750mm
13. Weight: 25KG
Service hotline：
Receipt mail：
